Filter
Top Products
Configuring APs 335
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Specifying the external antenna model
To specify the 2.4 GHz external antenna model, use the following command:
set {ap port-list | ap ap-num} radio {1 | 2} antennatype {internal | 24143 | 24123 | 24113 | 24203
| 24403 | 24453 | 24493 | 24553 | 24883 | mixed | 24143-OUT | 24143-OUT-10 |
24143-OUT-25 | 24143-NEMA | 24143-NEMA-10 | 24143-NEMA-25 | 24123-OUT |
24123-OUT-10 | 24123-OUT-25 | 24123-NEMA | 24123-NEMA-10 | 24123-NEMA-25 |
24113-OUT | 24113-OUT-10 | 24113-OUT-25 | 24113-NEMA | 24113-NEMA-10 |
24113-NEMA-25 | 24493-OUT | 24493-OUT-10 | 24493-OUT-25 | 24493-NEMA |
24493-NEMA-10 | 24493-NEMA-25 | 24883-OUT | 24883-OUT-10 | 24883-OUT-25 |
24883-NEMA | 24883-NEMA-10 | 24883-NEMA-25}
To specify the 5.0 GHz external antenna model, use the following command:
set {ap port-list | ap ap-num} radio {1 | 2} antennatype {internal | 5303 | 5643 | 5133 | 5173 |
5103 | mixed | 5133-OUT | 5133-OUT-10 | 5133-OUT-25 | 5133-NEMA | 5133-NEMA-10 |
5133-NEMA-25 | 5643-OUT | 5643-OUT-10 | 5643-OUT-25 | 5643-NEMA |
5643-NEMA-10 | 5643-NEMA-25 | 5173-OUT | 5173-OUT-10 | 5173-OUT-25 |
5173-NEMA | 5173-NEMA-10 | 5173-NEMA-25 | 5103-OUT | 5103-OUT-10 |
5103-OUT-25 | 5103-NEMA | 5103-NEMA-10 | 5103-NEMA-25}
To configure antenna model 5303 for a 2330/2330A/2330B on AP 1, type the following command:
WSS# set ap 1 radio 1 antennatype 5303
success: change accepted.
Note. The options displayed are dependent upon the access point model number that
this command is executed against.