Configuring APs 349
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Displaying static IP address information for APs
To display information about APs that have been configured with static IP address information, use the following
command:
show ap boot-configuration ap-num
To display statistics counters for AP 1, type the following command:
WSS# show ap boot-configuration 1
Flags: 11
ap: 1
Enable ip: yes
Enable vlan: no
Enable wss: yes
Vlan Tag: off
IP address: 172.16.0.42 IP netmask: 255.255.255.0
gateway: 172.16.0.20
WSS IP: 172.16.0.21 DNS: 172.16.0.1
WSS name: 2350
(For information about the fields in the output, see the Nortel WLAN Security Switch 2300 Series Command Line
Reference.)