Configuring and managing IP interfaces and services 169
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Configuring DNS servers
You can configure a WSS to use one primary DNS server and up to five secondary DNS servers to resolve DNS queries.
The WSS always sends a request to the primary DNS server first. The WSS sends a request to a secondary DNS server
only if the primary DNS server does not respond.
Adding a DNS server
To add a DNS server, use the following command:
set ip dns server ip-addr {primary | secondary}
Removing a DNS server
To remove a DNS server, use the following command:
clear ip dns server ip-addr