Filter
Top Products
Chapter 1 Contivity 4600 Option Installation 25
Installing Hardware Options for the Contivity VPN Switch
Figure 5 Installing Contivity 4600 DIMMs
7
Pull up the locking levers on both sides of the next available DIMM, and snap
the DIMM into its socket.
8
Replace the support bracket by tightening the two secured captive screws and
the rear Phillips screw.
9
Push in the slide-out tray and tighten the thumb-screws.
Replacing a Contivity 4600 power supply
To remove the power supply:
1
Remove the front bezel as shown in Figure 1.
2
Use a flat-head screwdriver to unscrew the top and bottom power supply
screws, as shown in Figure 6.
1
2
2
3
4
Alignment
Keys
Locking lever
CS460009A