Filter
Top Products
58 Chapter 4 Contivity 2600 Option Installation
302283-E Rev 00
Removing the Contivity 2600 front bezel
You must remove the bezel to insert the recovery diskette. Note that you do not
need to turn off the switch if you are only removing the front bezel. Figure 24
shows you how to remove the front bezel from the switch.
Figure 24 Removing the Contivity 2600 front bezel
Note:
Removing the front bezel on the Contivity 2600 system activates
the chassis intrusion alarm whether or not the switch is turned on. This
intrusion is reported to the system log file.
Caution:
When handling the switch outside of the rack-mount shelf, do
not use the part labeled with the Nortel Networks logo and the LEDs as a
handle.
CS260015A