Filter
Top Products
42 Chapter 2 Contivity 4500 Option Installation
302283-E Rev 00
Figure 14 Removing a Contivity 4500 hard disk drive
3
Insert the replacement hard drive fully, and lock it by turning the key
clockwise. Make sure the hard disk drive LED shows the proper drive
number.
4
Replace the front bezel.
5
Reload the software on the disk. Refer to “Using the Recovery Diskette” in
Installing the Contivity 4600 for more information on using the recovery
diskette.
Software
Enable the switch by following these steps:
1
Use your Web browser to navigate to the switch, and go to the Admin!File
System display.
2
Click on the drive and click the Enable button.
CS460011A
Drive 0
Drive 1
Insert and turn key, then
remove hard disk by handle.
Alert/Fail
Boot/Ready