Filter
Top Products
Chapter 3 Contivity 2500/2000/4000 Option Installation 55
Installing Hardware Options for the Contivity VPN Switch
To replace or change a DIMM, follow these steps.
1
Turn off the switch.
2
Remove the power cord.
3
Remove the front bezel as shown in Figure 15.
4
Remove the top cover as shown in Figure 16.
5
Press down the locking levers on both sides of the next available slot to allow
the new DIMM to be inserted.
6
Pull the DIMM up to remove it from the slot.
7
Place a new DIMM in the slot, making sure to properly position the DIMM's
alignment keys. Make sure the DIMM is pressed firmly into the socket.
8
Pull up the locking levers on both sides of the DIMM, and snap the DIMM
into the slot.
9
Replace the top cover.
10
Replace the front bezel.
Memory option
The Contivity 2500/2000/4000 ships with 128 Mbits of memory installed. An
additional 128 Mbits can be installed. To increase the memory, contact Nortel
Networks Customer Support.