Filter
Top Products
44 Chapter 3 Contivity 2500/2000/4000 Option Installation
302283-E Rev 00
Figure 15 Removing the Contivity 2500/2000/4000 front bezel
The first few times you remove the front bezel it will be rather difficult to remove.
This is because the ball stud and sockets are new. After a few times, removal is
easier. Sliding the top cover back is optional; it allows you to get a better grip on
the front bezel for removal.
Remove the switch’s front bezel as follows:
1. Optionally, remove the three screws at the top rear of the chassis, then
slide the top cover back.
2. Slide your fingers between the front bezel and the switch.
3. Pull forward firmly.
Front Bezel
Slide fingers behind
front bezel and firmly
pull forward in the
direction of arrows.