Filter
Top Products
62 Chapter 4 Contivity 2600 Option Installation
302283-E Rev 00
Installing LAN/WAN and hardware accelerator option
cards
Figure 27
shows you how to install LAN, WAN, or hardware accelerator option
cards into the switch. You can use Slots 1 to 4 for any mix of LAN and WAN
cards.
Figure 27 Installing LAN/WAN or hardware accelerator cards
To remove the front bezel and cover, you need a Phillips screwdriver.
1
Power off the switch.
2
Remove the power cord.
Motherboard
Option Card
Filler Panel
Rear of Unit
Option Card Slots
CS2600017A