Filter
Top Products
Chapter 4 Contivity 2600 Option Installation 59
Installing Hardware Options for the Contivity VPN Switch
The first few times you remove the front bezel it will be rather difficult to remove.
This is because the ball studs and socket clips are new. After a few times, removal
is easier.
To remove the front bezel, you need a Phillips screwdriver.
1
Turn each of the two screws on the front bezel a quarter turn
counter-clockwise.
2
Grip the two handles and pull the bezel towards you firmly to unsnap it from
the chassis.
Removing the Contivity 2600 top cover
To remove the cover to install LAN, WAN, or hardware accelerator cards or to
install additional memory, you must remove the switch’s front bezel and then you
must remove the switch’s top cover. Figure 25 shows you how to remove the top
cover from the switch.