Filter
Top Products
Chapter 4 Contivity 2600 Option Installation 65
Installing Hardware Options for the Contivity VPN Switch
To replace or change a DIMM, follow these steps.
1
Turn off the switch.
2
Remove the power cord.
3
Remove the front bezel as shown in Figure 24.
4
Remove the top cover as shown in Figure 25.
5
Press down the locking levers on both sides of the next available slot to allow
the new DIMM to be inserted.
6
Pull the DIMM up to remove it from the slot.
7
Place a new DIMM in the slot, making sure to properly position the DIMM's
alignment keys. Make sure the DIMM is pressed firmly into the socket.
8
Pull up the locking levers on both sides of the DIMM, and snap the DIMM
into the slot.
9
Replace the top cover.
10
Replace the front bezel.
Memory option
The Contivity 2600 ships with 128 Mbits of memory installed. An additional 128
Mbits can be installed. To increase the memory, contact Nortel Networks
Customer Support.