Filter
Top Products
52 Chapter 3 Contivity 2500/2000/4000 Option Installation
302283-E Rev 00
Replacing a Contivity 4000 disk drive
To replace a Contivity 4000 disk drive, you must do the following:
Software
First save any data that has not yet been saved to the hard disk from the disk
cache:
1
Use your Web browser to navigate to the switch, and go to the Admin!File
System display.
2
Click the button “Prepare selected device for removal.”
Hardware
Remove the switch’s front bezel as shown in Figure 15; then follow these steps:
1
To remove a Contivity 4000 hard disk drive, insert and turn the hard disk
drive key to the right as shown in Figure 22. The LED becomes a “U” for
unlocked.
NOTE:
Turning the key shuts off the power to the hard disk drive.