Oki 6500 Printer User Manual


 
B6500 User’s Guide> 120
2. Hold the drum/toner cartridge by
the grip and pull it out slowly.
NOTE
> To prevent the toner from dirtying
the floor, lay a piece of paper on
the floor first before putting the
drum/toner cartridge down.
3.Take the new drum/toner
cartridge out of the packaging box
and shake it 7 to 8 times as shown
in the diagram.
Important:
If the toner is not evenly spread
out, the print quality may be
reduced. Also, if you did not shake the drum/toner cartridge
well, there may be operating noise or the interior of the
cartridge may be damaged during operation.
Do not touch the surface of the photosensitive drum.
4.Place the drum/toner cartridge on
a flat surface and pull out the seal
horizontally.
Important:
When pulling out the seal, pull it
out horizontally. The tape might
break if it is pulled out diagonally.
After the seal has been pulled out, do not shake or bump the
drum/toner cartridge.
5. Hold the drum/toner cartridge by
the grip and insert it into the slot
inside the printer.
Important:
Do not touch any parts inside the
printer.
Ensure that the drum/toner
cartridge is firmly set.
After opening cover A, remove any dust or stains inside the
printer with a dry clean cloth.