Filter
Top Products
Installing additional memory> 87
I
NSTALLING
ADDITIONAL
MEMORY
This section explains how to install additional RAM memory into
your MFP as a memory upgrade.
O
RDER
CODES
Use the following order codes for additional memory:
> 256MB RAM – 70043201
M
EMORY
UPGRADE
The model comes equipped with 96MB of main memory (32Mb
plus 64Mb). This can be upgraded with an additional memory
board containing 256MB, giving a maximum total memory
capacity of 288MB.
Installation takes a few minutes, and requires a medium size
cross-head (Philips type) screwdriver.
1. Switch the machine off and disconnect the AC power
cable.
2. Press the cover release and open the machine’s top cover
fully.
WARNING!
If the machine has been powered on recently, the fuser
will be hot. This area is clearly labelled. Do not touch.