Filter
Top Products
Getting started > 14
P
RODUCING
A
TEST
PRINT
To check that your printer is operational, produce a test print on
a sheet of 80 gsm A4 paper (for example) as follows:
1. Turn the printer Power Switch to OFF.
2. Set the Paper Type Lever to cut sheet and set the Paper
Thickness Lever to position 1.
3. Press and hold the LF button and turn the Power Switch to
ON.
4. With the long side of the paper against the paper guide,
insert the paper carefully into the printer. The printer will
automatically grip the paper and start the test print.
NOTE
If required, you can pause the test print by pressing the SEL
button and then resume the test print by again pressing the
SEL button.
5. When the test print has completed, the paper is
automatically ejected.
NOTE
If you want to abort the test print for any reason, press the SEL
button followed by the PARK button to eject the paper and then
turn the printer Power Switch to OFF.
CAUTION!
Allow at least 5 seconds between turning the printer ON
after turning it OFF. A shorter time interval between
turning ON/OFF operations may cause printer power
failure.
Do not turn the printer OFF while it is printing as this
may result in damage to the print head.