Filter
Top Products
Operating instructions > 40
I
NITIALISING
MENU
SETTINGS
To restore the menu settings to their initial values, carry out the
steps below.
NOTE
The values adjusted by the Adjustment menus are not
initialised by the following procedure.
1. Set the Power Switch to OFF.
2. Press and hold down the SEL and SHIFT buttons together
then set the Power Switch to ON.
Registration Low Adjust the print starting
position on printing in
the reverse direction.
(The position moves to
the right or left in 1/
720 in increments.)
-10 – -1
0
+10 – +1
Registration Normal Adjust the print starting
position on printing in
the reverse direction.
(The position moves to
the right or left in 1/
720 in increments.)
-10 – -1
0
+10 – +1
Registration High1 Adjust the print starting
position on printing in
the reverse direction.
(The position moves to
the right or left in 1/
720 in increments.)
-10 – -1
0
+10 – +1
Registration High2 Adjust the print starting
position on printing in
the reverse direction.
(The position moves to
the right or left in 1/
720 in increments.)
-10 – -1
0
+10 – +1
LF Revise (Cut Sheet) Adjust a line feed
amount in cut-paper
mode.
-14 – -1
0
+14 – +1
ITEM FUNCTION SETTING