Filter
Top Products
Operating instructions > 37
PE Detection Select whether to
detect paper end or not.
OFF
ON
Table Print Set whether to divide a
path or not to print on
occasions when printing
by the same headpin
continues for 3 in or
more in the same print
block.
Standard
Special
Line Spacing Select line feed pitch. 6 LPI
8 LPI
Page Width Set width of a line to
determine the number
of ANK (10CPI)
characters to be
printed. With this
setting, the right
margin is set. For
reduced-size prints, at
75 % or 50%, 136
characters are printed.
10.6 in
8 in
Form Tear-Off Select manual or auto
as the method to
advance a continuous
form to the form tear-
off position.
Off
500 ms
1 sec
2 sec
Skip Over Perforation Select whether to skip
over perforation or not.
(When a skip over
perforation setup
command is received,
the received command
is given priority.)
Yes
No
Page Length
(Continuous)
Select the length of a
continuous form.
3.5 in, 4 in, 5.5 in, 6 in,
7 in, 8 in, 8.5 in, 11 in,
11 2/3 in, 12 in, 14 in,
17 in, 5 in, 3 in, 3.25 in
ITEM FUNCTION SETTING