Filter
Top Products
Paper handling > 26
4. Open the Rear Cover by gently pulling it out horizontally
to the end of its travel then swinging it upwards until it
locks into position.
5. Lift the Pin Tractor covers (1) and remove the forms.
6. Close the Pin Tractor covers.
7. Close the Rear Cover by gently swinging it downwards to
the horizontal and then pushing it inwards until it locks
into position.
S
ETTING
THE
P
APER
T
HICKNESS
LEVER
There are 10 lever positions, the first 9 for printing purposes and
the tenth to facilitate ribbon replacement.
Set the Paper Thickness lever for different paper types as follows:
1
PAPER TYPE
LEVER POSITION
1 2 3 4 5 - 9
Cut sheet paper See below
52 – 80 gsm X
81 – 127 gsm X
128 – 156 gsm X
Envelope X
Carbon paper or Pressure-
sensitive paper (40 gsm)
See below
2 part X
3 part X