Filter
Top Products
Troubleshooting > 53
The selected skip over
perforation spacing
does not match the
physical tear-off
perforation positions.
The paper length
selected in the
application does not
match the physical
paper length.
Match the paper length
selected in the
application with the
physical paper length in
use.
Select the paper length
in number of lines in the
application.
Abnormal switchover between cut sheet and continuous forms modes.
No cut sheet feed. The printer is in
continuous forms mode.
Set the Paper Type
lever to cut sheet mode.
No continuous forms
feed.
The printer is in cut
sheet mode.
Set the Paper Type
lever to continuous
forms mode.
Paper feed operations
for both cut sheets and
continuous forms are
actuated.
The cut sheet is not
ejected.
Eject the cut sheet.
PROBLEM CAUSE ACTION