Filter
Top Products
Operating instructions > 30
B
UTTON
SWITCHES
SWITCH STATUS FUNCTION
SEL On-line Sets the printer to off-line
Off-line Sets the printer to on-line
and disalarms the printer
SHIFT Used only in conjunction
with one of the following
buttons: SEL, LF, FF/LOAD,
PARK, TEAR described
below.
LF On-line Feeds paper by one line.
Holding the button down
results in continuous line
feeding.
Off-line Feeds paper by one line.
Holding the button down
results in continuous line
feeding.
FF/LOAD On-line and off-line
Continuous Forms mode
Continuous form fed until
first line of next page
On-line and off-line
Cut sheet manual mode
Ejects the cut sheet
TEAR On-line
Continuous Forms mode
Delivers the continuous
form to the cut position. If
the button is pressed again
or data is received, the
original form position is
restored.
On-line
Cut sheet manual mode
Ineffective
Off-line Ineffective
PARK Continuous Forms mode If the continuous form is in
position, press to retract the
form to the Pin Tractors.
(If the sprocket holes of the
last page of the form
disengage from the sprocket
pins, do not attempt to eject
the paper as a paper jam
may result.)
SHIFT+SEL Enters menu mode