Filter
Top Products
Operating instructions > 36
Rcv Buffer Select size of the
received buffer.
0, 2 K, 32 K, 64 K
Print Suppress Effective Set whether to enable
or disable a print
suppress setup
command.
Yes
No
Auto LF Select whether to
perform auto LF
operation or not upon
receiving a CR code.
Yes
No
Auto CR
*IBM PPR only
Select whether to
perform auto CR
operation upon
receiving a carriage
return command.
Yes
No
SI Select Pitch (10CPI)
*IBM PPR/AGM only
Set how to handle an SI
command received in
10 CPI mode.
15 CPI
17.1 CPI
SI Select Pitch (12CPI)
*IBM PPR/AGM only
Set how to handle an SI
command received in
12 CPI mode.
12 CPI
20 CPI
Reset Inhibit Set whether to enable
or disable an initial
command.
No
Yes
Select Language Set
*EPSON only
Set whether to enable
or disable a
combination of the code
page setting and the
language setting by
menu.
Combined
Code Page Only
Impact Mode Select print mode on
power on. (This item is
referred to on
initialisation only by I-
PRIME or power on but
not by an initialisation
command.)
Normal
Quiet
Hi Copy
Print Direction
Command
Select the validity of a
one-way print setup
command.
Valid
Invalid
Power Save Time Set idle time to enter
power save mode.
5 min, 10 min, 15 min,
30 min, 60 min
ITEM FUNCTION SETTING