Filter
Top Products
Operating instructions > 32
S
ETTING
MENU
VALUES
The following information explains the printer settings and how
you can change them. Printer items and their values are printed
for reference.
C
ONFIRMING
CURRENT
SETTINGS
To print the current menu settings, use a cut sheet of A4 paper
or continuous forms of width at least 254 mm. In this example,
a sheet of A4 paper is used.
1. Set the Paper Type lever to cut sheet mode.
2. Carry out one of the following:
(a) If the printer power is OFF, while holding down the
SEL button set the printer Power Switch to ON.
(b) If the printer power is ON, press the SHIFT and SEL
buttons together.
3. Place the cut sheet on the Paper Tray. The cut sheet is
taken into the printer automatically and the printer
prompts you to request a menu settings print.
4. Press the PARK button and the printer prints out all the
menu items currently selected and their corresponding
settings.
5. Exit or proceed to change menu settings:
(a) To exit menu settings confirmation, save the current
settings and eject the paper, press the SHIFT and
SEL buttons together.
(b) To change menu settings, see “Menu setting” on
page 33.