Filter
Top Products
Operating instructions > 39
Wait Time Select the waiting time
between setting paper
on the tray and feeding
it while the printer is
waiting for paper to be
fed in cut-paper manual
feed mode.
500 ms
1 sec
2 sec
I-Prime Select whether to print
or clear buffer contents
upon initialisation by
receiving I-PRIME.
Invalid
Buffer Clear
Buffer Print
Auto Feed XT
*EPSON only
Set the validity of an
Auto Feed XT signal.
Valid
Invalid
I/F Bi-Direction Set whether to return a
device ID or not in
accordance with
IEEE1284.
Enable
Disable
TOF Adjustment
(Cut Sheet)
Select an adjustment
value for the reference
position in regard to the
TOF position of cut-
paper/passbooks.
The position moves to
the rear of the form by
[+] and to the top of
the form by [-] in 1/
60 in increments.
-7 – -1
0
+7 – +1
Rear Load Adjustment Select an adjustment
value for the reference
position in regard to the
TOF position of a
continuous form.
The position moves to
the rear of the form by
[+] and to the top of
the form by [-] in 1/
60 in increments.
-7 – -1
0
+7 – +1
Cut Position Adjust Select an adjustment
value for the position to
cut the end of a
continuous form. (In 1/
90 in increments)
-7 – -1
0
+7 – +1
ITEM FUNCTION SETTING