Filter
Top Products
Operating instructions > 38
TOF (Continuous) Select the reference
position for the TOF
position when auto
loading continuous form
paper from the rear of
the printer. (Up to the
mid-section of
characters in the first
line.)
“1Chr. Set Pos.” is
printed if the TOF
position is set by using
SHIFT + PARK switches.
2.12 mm (1/12 in)
4.23 mm (1/6 in)
6.35 mm (1/4 in)
8.47 mm (1/3 in)
10.58 mm (5/12 in)
12.7 mm (1/2 in)
14.82 mm (7/12 in)
16.93 mm (2/3 in)
19.05 mm (3/4 in)
21.17 mm (5/6 in)
23.28 mm (11/12 in)
25.4 mm (1 in)
27.52 mm (13/12 in)
1Chr. Set Pos.
Initial Position This is the position of
the paper when the
paper is already loaded
at power on. (For
continuous form mode
only.)
Print
Tear OFF
Auto Eject Position Select a printable area
at the bottom of cut
sheets of paper in cut-
paper mode (the
character centre
position).
6.35 mm (1/4 in)
14.8 mm
Page Length (Cut
Sheet)
Select the page length
of cut-paper.
3.5 in, 4 in, 5.5 in, 6 in,
7 in, 8 in, 8.5 in, 11 in,
11 2/3 in, 12 in, 14 in,
16.57 in, 5 in, 3 in,
3.25 in
TOF (Cut Sheet) Select the reference
position for the TOF
position when feeding
cut-paper in manual
mode. (Up to the mid-
section of characters in
the first line.)
“1Chr. Set Pos.” is
printed if the TOF
position is set by using
SHIFT + PARK switches.
2.12 mm (1/12 in)
4.23 mm (1/6 in)
6.35 mm (1/4 in)
8.47 mm (1/3 in)
10.58 mm (5/12 in)
12.7 mm (1/2 in)
14.82 mm (7/12 in)
16.93 mm (2/3 in)
19.05 mm (3/4 in)
21.17 mm (5/6 in)
23.28 mm (11/12 in)
25.4 mm (1 in)
27.52 mm (13/12 in)
1Chr. Set Pos.
ITEM FUNCTION SETTING