Filter
Top Products
112
Menu
Sub menu
Parameter 1 Parameter 2 Parameter 3 Parameter 4
Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
IN/OUT DVIOut Parameter Signal Mode ↓ Size ↓ Scale ↓
12/15 Setting range OUT3, OUT5
Dig, Ana Auto, XGA,
WXGA, SXGA,
WSXGA+, UXGA,
WUXGA
Fit-V, Fit-H, Full,
5:4 (“5:4” can be
selected when
SXGA has been
selected as the
Size item setting.)
Default value — Dig Auto Fit-V
UpConvt Parameter Signal Scale ↓ MovDet ↓ Sharp ↓
13/15 Setting range IN5 to 8
SQ, EC, LB 1 to 5 1 to 5
Default value — SQ 3 3
CmpsitIn Parameter Signal Chroma Ped Hue
14/15 Setting range IN5 to 8 −8 to +7 −100 to +100 −30 to +30
(Enabled when the
system format is
set to 1080/59.94i,
720/59.94p and
480/59.94i.)
Default value — 0 0 0
DownConv Parameter Signal Scale ↓ Delay ↓ Sharp ↓
15/15 Setting range OUT3 to 6
SQ, EC, LB 90H (75H), 1F 1 to 5
Default value — SQ 90H 1
MEMORY PSMEM Parameter Mode NO.Sel XPT Exec ↓
1/4 Setting range Store, Recall,
Clear
1 to 10
Disable, Enable
Default value — — — —
FMEM Parameter Signal Store Review Exec ↓
2/4 Setting range AUX FMEM1, FMEM2 On, Off
Default value — — Off —
SDCard Parameter Mode ↓ Select Sa
veFile Exec ↓
3/4 Setting range
Load, Save, Init,
Delete, No Card
FMEM1, FMEM2,
System
HS070531100000
Default value — — —
CardInfo Parameter Images FreeSpace GetInf ↓
4/4 Setting range MB/ MB
Default value
XPT XPTStats Display only
SIG:B 1 2 3 4 5 6 7 8 G
XPT:1 2 3 4 5 6 7 8 9 10
1/3
XPTAsign Parameter XPT Signal
2/3 Setting range 1 to 10 IN1 to 8, Black,
CBGD, CBAR,
FMEM1, FMEM2,
None
Default value — —
XPTSwch Parameter Timing
3/3 Setting range Any, Field1, Field2
Default value Any
8. Setting menu table