Filter
Top Products
49
3. Basic operations
3-7. Internal color signals
3-7-1. Setting the color background
The color background to be used by the bus can be set.
Two methods are available: under one method the Hue (hue), Sat (color saturation) and Lum (luminance) are set,
and under the other the 8 preset colors (white, yellow, cyan, green, magenta, red, blue and black) are called.
The Hue, Sat and Lum of the called colors can also be adjusted.
Adjusting the colors
1
Press the [FUNC] button to light its indicator, and press the [COLOR] button to display the COLOR menu.
2
Turn [F2], [F3] and [F4] to perform the color adjustments (Hue, Sat and Lum).
Calling the preset colors
Turn [F5] to select the preset color using the Load item, and press the [F5] switch.
The Hue, Sat and Lum values are changed to the preset color values.
To save the values that were set before calling the preset color, refer to “3-10. Preset memory”.
<Menu display>
CBGD Hue Sat Lum Load
1/1 100.0 100.0 100.0 White
0.0
|
359.9
0.0
|
100.0
0.0
|
108.0
Yellow
Cyan
Green
Magenta
Red
Blue
Black