Filter
Top Products
117
SDI outputs HD: Serial digital (SMPTE 292M)
SD: Component digital (SMPTE 259M)
BNC connector, PGM 1 (2 outputs), OUTPUT 1 to 6, up to 6 lines
OUTPUT 3 to 6 are optional outputs.
HD [SMPTE 292M (BTA S-004B) standard complied with]
• Output retur
n loss More than 15 dB (5 MHz to 750 MHz)
More than 10 dB (750 MHz to 1.5 GHz)
• Output level 0.8 Vp-p
10 % (75 )
• Rise time
Less than 270 ps
• Fall time Less than 270 ps
• Difference between rise time and fall time
Less than 100 ps
• Alignment jitter
Less than 0.2 UI (130 ps)
• Timing jitter Less than 1.0 UI
• Eye aperture ratio More than 90 %
• DC offset 0
0.5 V
SD [SMPTE 259M standard complied with]
• Output retur
n loss More than 15 dB (5 MHz to 270 MHz)
• Output level 0.8 Vp-p 10 % (75 )
• Rise time
Less than 1.5 ns
• Fall time Less than 1.5 ns
• Difference between rise time and fall time
Less than 0.5 ns
• Jitter
Less than 0.2 UI
Analog composite
input (option)
Analog composite (1.0 Vp-p, 75 )
BNC connector, IN5 to 8 (with loop-through), up to 4 lines
Analog input
(option)
SD/HD analog component Y/Pb/Pr (1.0 Vp-p, 75 )
BNC connector, IN5 to 8, up to 4 lines
Analog output
(option)
SD/HD analog component Y/Pb/Pr (1.0 Vp-p, 75 )
BNC connector, OUTPUT3 to 6, up to 4 lines (which can be assigned)
DVI-I input
(option)
XGA (1024768), WXGA (1280768), SXGA (12801024)
Vertical frequency: 60 Hz
DVI-I connector, IN5 to 8, up to 4 lines
DVI-I output
(option)
XGA (1024768), WXGA (1280768), SXGA (12801024),
WSXGA+
(16801050), UXGA
(16001200), WUXGA
(19201200)
(: Selectable only when digital signals are output)
Vertical frequency: 60 Hz
DVI-I connector, OUTPUT3, OUTPUT5, up to 2 lines (which can be assigned)
Key input 1 input from video inputs
Downstream Key
input
1 input from video inputs
Reference input
BNC connector, Black burst or Tri-level Sync (with loop-through) 1
Reference output
In gen-lock mode: BNC connector, loop-through output 1,
In internal sync mode: BNC connector, black burst 2
Video delay time Frame synchronizer OFF 1H
Frame synchronizer ON 1F
10. Specifications and standard accessories