Filter
Top Products
26
3. Basic operations
3-2-4. Setting the wipe start position
Any start position can be set for wipe pattern WIPE and SQ #5.
The start position has one set of values for a background pattern and another set for a key pattern.
1
Press the [FUNC] button to light its indicator, and press the [WIPE] button to display the WIPE menu.
2
Turn [F1] to display the WIPEPos sub menu or the SQPos sub menu.
<Menu display>
WIPEPos
Select X-Pos Y-Pos CopyTo
3/5 BKGD 0.00 0.00 KEY
KEY
−100.00
|
+100.00
−100.00
|
+100.00
3 Turn [F2] to select the pattern (background or key) to be set using the Select item.
4
Either operate the positioners or turn [F3] and [F4] to set the wipe start position using the X-Pos item and
Y-Pos item.
These settings can be established only when WIPE or SQ #5 has been selected as the background pattern
or key pattern.
5
Either operate the fader lever or press the [AUTO] button to check the wipe operation.
(When, for instance, –50 has been set for X-Pos and –50 for Y-Pos, the following screen (or key) appears
from the bottom left and wipe is performed while the screen (or key) moves to the screen center.)
<X-P
os, Y-Pos setting range>
Inside screen area
Outside screen area
6
To copy the start position settings, press [F5].
The copy destination appears under the CopyTo item. (It will not change even if [F5] is turned.)