Filter
Top Products
13
1. Functions in each area
D [AUTO] button
This is used to automatically execute transitions (auto transition) using the transition time which has been set.
During auto transition its indicator lights in amber. When the button is pressed again during auto transition, the
auto transition operation is suspended, and the indicator lights in green. When it is pressed again while auto
transition is suspended, the remaining transition is executed.
The indicator goes off when auto transition is completed.
When the [AUTO] button is pressed while the fader lever (J) is at an interim setting, the transition is executed
in the time remaining from the interim setting.
E [CUT] button
This button is used to execute transitions instantly.
Its indicator lights in amber during a transition, and it goes off when the transition is completed.
F [FTB] button
This button is used to execute fade-out to a black screen or fade-in from a black screen for the transition time
which has been set.
G [PinP] button
This button is used to execute fade-in or fade-out of the picture in picture for the transition time which has been
set.
H [DSK] button
This button is used to execute fade-in or fade-out of downstream key for the transition time which has been set.
I Wipe direction selection buttons
These buttons are used to select the direction in which to wipe for executing background transitions.
When the [R] indicator is off:
Wiping proceeds in the normal direction.
When the [R] indicator is lighted:
Wiping proceeds in the reverse direction.
When the [N/R] indicator is lighted:
The normal direction is replaced with the reverse direction (or vice versa) when the transition is
completed. (The lighted and extinguished statuses of the [R] button are also switched in line with the
direction of the wiping.)
J Fader lever
This is used to execute background or key transitions. When it is moved as far as it will go, the transition
is completed. When it has been operated during auto transition, auto transition will be switched to manual
operation as soon as the fader position overtakes the amount of the transition being executed.
K Bus tally LEDs
These indicate the output statuses of the A bus and B bus. The LED corresponding to the bus whose program
signals (PGM) are being output lights.