Filter
Top Products
58
3. Basic operations
3-12-2. Saving data on SD memory cards
1 Insert the SD memory card which has been initialized by the unit, into the SD memory card slot.
2
On the MEMORY menu, turn [F1] to display the SDCard sub menu.
3
Turn [F2] to select “Save” using the Mode item, and then press the [F2] switch.
<Menu display>
SDCard Mode Select SaveFile Exec
3/4
Save FMEM1
FMEM2
System
4 Turn [F3] to select the data which is to be stored on the SD memory card using the Select item.
FMEM1, 2:
Still image data of frame memory 1, frame memory 2
System:
System data
5
If the [F5] switch is now pressed, the file is stored on the SD memory card.
(Filenames are allocated automatically.)
System data: “HS400/SYSTEM”
folder
Still image data: “HS400/IMA
GE” folder
While the file is being stored, the following message and filename are displayed.
SDCard Saving File
3/4 HS070531100000