Filter
Top Products
Sending Documents via Telephone Line
111
Memory Transmission
Basic Operations
Multi-Station Transmission (Broadcasting)
If you have to send the same document(s) to multiple stations, you can save time in feeding the
document(s) by using memory transmission. That is, you can store the document(s) into memory and then
send it to the station(s) automatically.
NOTE
1. You can review the stations you entered in Step 3 before storing your document into memory
by pressing or . Press to clear an entered station or group shown on the
display if needed.
2. The “Quick Memory Transmission” is disabled if multiple stations are set.
1
Set document(s) face down.
ENTER STATION(S)
THEN PRESS START 00%
2
Dial by any combination of the following methods:
• One-Touch Dialing
• Abbreviated Dialing
• Manual Number Dialing, press after each
station is entered
(Up to 70 stations)
• Directory Search Dialing (Auto Dialer and the LDAP),
• press after each station is entered
(For details, see pages 108 to 110.)
Ex:
• If you want to confirm the number of stations you have
entered, press .
<01>(Station name)
5551234
[010](Station name)
5553456
2 STN(S) ARE SET
ADD MORE OR START
3
The document is stored into memory with a file number.
Then starts dialing the telephone numbers in sequence.
* STORE * NO.001
PAGES=001 01%
* STORE * COMPLETED
TOTAL PAGE=005 25%
* DIALING * NO.001
(Station name)
SET
SET
0
1
0
SET
CLEAR