Filter
Top Products
Troubleshooting
223
Problem Solving
Print Copy Quality Vertical lines printing
on the received
document
Print out a Journal report (e.g. FUNCTION, 6, 1 , SET and 1)
and check quality to make sure whether your machine has
trouble.
If Journal report quality is OK, your machine has no problem,
report to the sending party that they have a problem.
If copy is NG, replace the Toner Cartridge.
210
34
Fuzzy print 1. Make sure you are using the correct paper for the best
possible print quality.
2. Try reversing the recording paper to the other side.
241
Missing dots or lines/
inconsistent darkness
within print
1. Make sure you are using the correct paper for the best
possible print quality.
2. Replace the Toner Cartridge.
241
34
Fading print Your Toner Cartridge may be running out of toner. Replace
the Toner Cartridge.
34
Faint print You may need to choose a different paper for the best
possible print quality.
241
Communication No dial tone 1. Check the connection of the telephone line.
2. Check the telephone line.
237
No auto answer 1. Check the connection of the telephone line.
2. Check the Reception mode setting.
3. If the Fax Parameter No. 13 (AUTO JOURNAL PRINT) is
set to "Valid" (default setting) and the machine is printing
the received document from memory, which also happens
to be the 32th transaction, the machine will not auto answer
until the Transaction Journal completes printing.
237
128
Cannot transmit or
receive
An information code will be shown on the display. Refer to the
information code table to find out the trouble.
226
No Unit Operation No unit operation To reset the machine, turn-off the Power Supply for a few
seconds then turn it on again.
40
Mode Symptom Cause / Action Page
Continued on the next page...