Filter
Top Products
Customizing Your Machine
82
Fax Parameter Table
044 PASSWORD-RCV *1 Off Setting a 4-digit RCV-Password and selecting whether the
machine performs and checks the RCV-Password of the
transmitting station when receiving. (See page 197)
2On
046 SELECT RCV *1 Invalid Selecting whether the machine performs selective
reception. (See page 194)
2Valid
047 REMOTE RECEPTION 1 Invalid Selecting whether or not the machine accepts remote
reception command. (See page 129)
*2 Valid
051 REMOTE
DIAGNOSTIC
*1 Invalid Selecting whether or not the machine accepts to update
the firmware or Remote Diagnostics from the remote
station. Please ask your Panasonic Authorized Dealer for
details.
2Valid
052 DIAGNOSTIC
PASSWORD
(----) Setting the password for Remote Diagnostic Mode.
Please ask your Panasonic Authorized Dealer for details.
053 SUB-ADDRESS
PASSWORD
(----) Setting a 20-digit password for secured sub-address
communication.
054 FAX FORWARD *1 Invalid Selecting whether the machine performs Fax Forwarding
to the specified destination. (See page 177)
2Valid
056 COVER SHEET *1 Off Setting the home position of the Cover Sheet parameter in
the Select Mode. (See page 173)
2On
058 LANGUAGE *1 A-English Selecting the language to be shown on the display and
reports.
2 C-French
3Spanish
065 PRINT COLLATION 1 Invalid Selecting whether the machine prints out documents in
sequence. (See page 135)
*2 Valid
082 QUICK MEMORY XMT 1 Invalid Selecting whether the machine performs Quick Memory
Transmission. (See page 108 to 110)
Invalid : Stores all documents into memory first before
dialing the telephone number.
Valid : Starts dialing the telephone number immediately
after storing the first page.
*2 Valid
099 MEMORY SIZE
(Flash Memory)
- - Displays the amount of base and optional memory
installed.
(Base Memory + Optional Memory)
140 LAN RELAY XMT
REQUEST
*1 Invalid Selecting whether the machine performs LAN Relay XMT
Request.
2Valid
142
RELAY XMT
(a.k.a. LAN RELAY
STATION on UF-770i)
1 Invalid Selecting whether the machine accepts and performs G3
relayed transmission. (Relay Station Functions)
*2 Valid
No. Parameter
Setting
Number
Setting Comments