Filter
Top Products
Sending Documents via Telephone Line
112
If your machine's memory is full or you wish to send the document immediately, use Direct Transmission.
Manual Number Dialing (Direct Transmission)
To dial the telephone number manually, follow the steps below.
NOTE
1. If you need a special access number to get an outside line, dial it first then press to
enter a pause (represented by a "-") before dialing the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,
press (represented by a "/").
The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
Ex: 9 PAUSE * 5551234
3. To stop the transmission, press .
The display shows:
COMMUNICATION STOP ?
1:YES 2:NO
Press to stop the transmission. The Communication Journal will not print out regardless of
the printout mode setting of the Communication Journal.
Direct Transmission
1
Set document(s) face down.
ENTER STATION(S)
THEN PRESS START 00%
2
MEMORY XMT=ON
1:OFF 2:ON
3
ENTER STATION
00%
4
Enter a telephone number from the keypad.
Ex:
PRESSSTARTTODIAL
5551234
❚
5
Your machine starts to dial the telephone number.
* DIALING *
5551234
8
9
1
5 5 5 1 2
3
4
PAUSE
STOP
1