Filter
Top Products
48
Setting the Internet Parameters
Before starting, you will need a completed copy of page 19 (Pre Installation Information). For your machine
to be able to operate on the Network properly, the following five (5) Basic Parameters must be pre-
programmed into the machine.
• IP Address
• Subnet Mask
• Default Gateway IP Address
• SMTP Server Name or IP Address
• Email Address
Note: If DHCP server is available on your network, the IP Address, Subnet Mask and Default Gateway
IP Address will be acquired automatically.
NOTE
1. To scroll the display to desired User Parameter in Step 3, press or .
2. If the DNS Server is not available, change the setting of the Fax Parameter No. 161 (DNS
SERVER) to "Invalid", then enter the IP Address instead.
3. For convenience, you can use to enter a period "." while programming IP Addresses only.
Otherwise is used to enter an asterisk under other conditions.
Setting the User (Internet) Parameters
1
SET MODE (1-8)
ENTER NO. OR
∨∧
2
1:USER PARAMETERS?
PRESS SET TO SELECT
3
repeatedly until display shows;
IP ADDRESS
❚
4
Enter the IP Address using the keypad. Press or
to enter the period ".". (See Note 3)
Ex:
IP ADDRESS
123.178.240.3
❚
5
To continue setting other parameters, or press
to return to standby.
SUBNET MASK
❚
7
1
1 2
3
1 7 8 2 4 0
3
STOP