Filter
Top Products
78
Customizing Your Machine
Your machine has a variety of adjustable Fax Parameters. These parameters, listed in the Parameter Table,
are preset for you and do not need to be changed. If you do want to make a change, read the table carefully.
Some parameters, such as the Resolution and Contrast parameters, can be temporarily changed by simple
key operation just before a transmission is made. When the transmission ends, however, these parameters
return to their preset values (Home position). Other parameters can only be changed by the procedure
described below.
NOTE
1. To scroll the Fax Parameters in Steps 2 or 4, press or .
2. To print out a Fax Parameter List, see page 220.
General Description
Setting the Fax Parameters
1
SET MODE (1-8)
ENTER NO. OR
∨∧
2
FAX PARAMETER(1-182)
NO.=
❚
3
Enter Fax Parameter number from the Parameter Table.
Ex: for CONTRAST
FAX PARAMETER(1-182)
NO.=001
4
01 CONTRAST
1:NORMAL
5
Enter the new setting value.
Ex: for LIGHTER
01 CONTRAST
2:LIGHTER
6
To set another parameter, press to return to
Step 3 or press to return to standby.
02 RESOLUTION
2:FINE
7
4
0 0
1
2
CLEAR
STOP