Filter
Top Products
Initial Programming
24
For Fax Advantage assistance, call 1-800-435-7329.
Initial Programming
Date and time, your logo and fax number
You should program the date and time, your logo and fax number. This information will be printed
on each page transmitted from your unit.
Setting the date and time
1 Press {MENU}.
SYSTEM SET UP
PRESS NAVI.[( )]
2 Press {<} or {>} until the following is
displayed.
SET DATE & TIME
PRESS SET
3 Press {SET}.
L Cursor (|) will appear on the display.
M:|01/D:01/Y:02
TIME: 12:00AM
4 Enter the correct month/day/year by
selecting 2 digits for each, using the dial
keypad.
Example: August 10, 2002
Press {0}{8} {1}{0} {0}{2}.
M:08/D:10/Y:02
TIME: |12:00AM
5 Enter the correct hour/minute by selecting 2
digits for each, using the dial keypad.
Press {*} to select “AM” or “PM”.
Example: 10:15PM
1. Press {1}{0} {1}{5}.
M:|08/D:10/Y:02
TIME: 10:15AM
2. Press {*} until “PM” is displayed.
M:|08/D:10/Y:02
TIME: 10:15PM
6 Press {SET}.
L The next feature will be displayed.
7 Press {MENU}.
Note:
L You can enter the number by pressing {+} or
{-} in steps 4 and 5. In this case, press {>}
to move the cursor.
L The accuracy of the clock is approximately
±60 seconds a month.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect number, and make the correction.
If you have registered with openLCR
service
The date and time will be automatically set. Do
not change the date and time setting yourself.
{SET}
{<}{>}{+}{-}
{MENU}