Filter
Top Products
Features Summary
74
Code #76: Setting the connecting tone
CONNECTING TONE
MODE=ON [±]
If you often have trouble when sending a fax, this
feature allows you to hear connecting tones; fax
tone, ring back tone and busy tone. You can
confirm the status of the other party’s machine.
L If the ring back tone continues, the other
party’s machine may not be a facsimile or
may have run out of paper. Check with the
other party.
L The connecting tone volume cannot be
adjusted.
ON (default): You will hear connecting tones.
OFF: Deactivates this feature.
Code #77: Changing the receiving mode in
the auto answer setting
AUTO ANSWER
MODE=TAD/FAX [±]
TAD/FAX (default): Telephone Answering
Device/Facsimile mode (page 48)
FAX ONLY: Facsimile only mode (page 47)
Code #80: Resetting advanced features to
their default settings
SET DEFAULT
RESET=NO [±]
To reset the advanced features:
1. Press {MENU}.
2. Press {#}, then {8}{0}.
3. Press {+} or {-} to select “YES”.
4. Press {SET}.
5. Press {SET} again.
6. Press {MENU}.