Filter
Top Products
Features Summary
69
Programming method for
advanced features
1 Press {MENU}.
SYSTEM SET UP
PRESS NAVI.[( )]
2 Press {<} or {>} until the following is
displayed:
ADVANCED MODE
PRESS SET
3 Press {SET}.
4 Select the feature you wish to program.
Press {<} or {>} until the desired feature
is displayed.
L The current setting of the feature will be
displayed.
5 Press {+} or {-} until the desired setting
is displayed.
L This step may be slightly different
depending on the feature.
6 Press {SET}.
L The setting you selected is set, and the
next feature will be displayed.
7 To exit programming, press {MENU}.
Programming by entering the program
code number directly
You can select a feature by directly entering the
program code (# and 2-digit number) instead of
using {<} or {>}.
1. Press {MENU}.
2. Press {#} and the 2-digit code number
(page 71 to page 74).
3. Follow steps 5 to 7 on this page.
To cancel programming
Press {MENU} to exit the program.
{SET}
{<}{>}{+}{-}
{MENU}