Filter
Top Products
Error Messages
76
For Fax Advantage assistance, call 1-800-435-7329.
Display
If the unit detects a problem, one or more of the following messages will appear on the display.
CALL SERVICE
L There is something wrong with the unit.
Contact our service personnel.
CHECK DOCUMENT
L The document was not fed into the unit
properly. Reinsert the document. If
misfeeding occurs frequently, clean the
document feeder rollers (page 87) and try
again.
L Attempted to transmit a document longer
than 600 mm. Press {STOP} to remove the
document. Divide the document into two or
more sheets and try again.
CHECK MEMORY
L The memory (telephone numbers,
parameters, etc.) has been erased. Re-
program.
CHECK PAPER
L The recording paper is not installed or the
unit has run out of paper. Install paper and
press {SET} to clear the message.
L The recording paper was not fed into the unit
properly (page 85). Reinstall paper (page 14)
and press {SET} to clear the message.
L The recording paper has jammed near the
recording paper entrance. Clear the jammed
paper (page 83) and press {SET} to clear the
message. Do not install folded or heavily
curled paper.
COVER OPEN
L The back cover is open. Close it.
DIRECTORY FULL
L There is no space to store new entries in
navigator directory. Erase unnecessary
entries (page 31).
FAX IN MEMORY
L The unit has a document in memory. See the
other displayed message instructions to print
out the document.
FAX MEMORY FULL
L The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper (page 14)
or clear the jammed paper (page 83).
L When performing memory transmission, the
document being stored exceeds the memory
capacity of the unit. Transmit the entire
document manually.
FILM EMPTY
L The film is empty. Replace the film with a new
one (page 81).
L The ink film is slack. Tighten it (page 82) and
install again.
L The fax machine is positioned near
appliances such as TVs or speakers which
generate an intense magnetic field.
FILM NEAR EMPTY
L The remaining film is low. Prepare a new film
(page 81).
MEMORY FULL
L When making a copy, the document being
stored exceeds the memory capacity of the
unit. Press {STOP} to clear the message.
Divide the document into sections.
MESSAGE FULL
L There is no room left in memory to record a
voice message. Erase unnecessary
messages (page 58, 64).
MODEM ERROR
L There is something wrong with the modem
circuit. Contact our service personnel.