Filter
Top Products
Automatic Dialing
29
Storing names and telephone numbers into
navigator directory
For rapid access to frequently dialed numbers, the unit provides the navigator directory (100 entries).
1 Press {MENU} repeatedly until the
following is displayed.
DIRECTORY SET
PRESS STATION OR
b
DIRECTORY SET
PRESS NAVI.
2 Press {>}.
NAME=
STORE:PRESS SET
3 Enter the name, up to 10 characters (see
page 26 for instructions).
Example: NAME=ALICE
STORE:PRESS SET
4 Press {SET}.
NO.=
5 Enter the telephone number, up to 30 digits,
using the dial keypad.
Example: NO.=5552233
L If you want to enter a hyphen, press
{FLASH}.
6 Press {SET}.
REGISTERED
u
NAME=
STORE:PRESS SET
L To program other entries, repeat steps 3
to 6.
7 Press {MENU} to exit the program.
Helpful hint:
L For your convenience, HELP-FAX (1-800-
435-7329) has been pre-programmed. If you
cannot solve a problem, call using this entry
(page 32). If unnecessary, you can erase it
(page 31).
L You can confirm the stored entries in the
telephone number list (page 90).
Note:
L When the following is displayed in step 6, you
can store only 5 more entries.
REGISTERED
SPACE= 5 DIRS.
L If there is no space to store new entries, the
following is displayed in step 6. Erase
unnecessary entries (page 31).
REGISTERED
DIRECTORY FULL
L A hyphen or a space entered in a telephone
number counts as two digits.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect character/number, and then make the
correction.
To delete a character/number
Press {<} or {>} to move the cursor to the
character/number you want to delete, and press
{STOP}.
{SET}
{<}{>}
{STOP}
(Delete)
{FLASH}
(Hyphen)
{MENU}