Filter
Top Products
Sending Faxes
45
Sending the same document
to pre-programmed parties
1 Insert the document FACE DOWN.
L If necessary, press {+} or {-}
repeatedly to select the desired
resolution (page 38).
2 Press {BROADCAST}.
L You can also use the navigator key.
Press {<} or {>}, then press {+} or
{-} until the following is displayed, and
press {SET}.
<BROADCAST>
SEND:PRESS SET
L The document will be fed into the unit
and scanned into memory. The unit will
then transmit the data to each entry,
calling each number sequentially.
L After transmission, the stored document
will be erased automatically, and the
unit will automatically print a broadcast
sending report.
Note:
L If you select “FINE”, “SUPER FINE” or
“PHOTO” resolution, the number of pages
that the unit can transmit will decrease.
L If the document exceeds the memory
capacity, sending will be canceled.
L If one of the entries is busy or does not
answer, it will be skipped. All skipped entries
will be redialed up to 2 times after all of the
other entries have been called.
To send the same document to more than
one party only once
You can also select the parties for each
transmission.
1. Insert the document.
2. Press {>}.
3. Press {+} or {-} until the following is
displayed.
<ONE TIME BROAD>
PRESS SET
4. Press {SET} to start programming the
entries you want to transmit to.
DIR= [00]
NAVI.[+ -] & SET
5. Press {+} or {-} until the desired entry you
want to transmit to is displayed.
Example: BILL
6543210
6. Press {SET}.
Example: DIR=BILL [01]
SEND:PRESS SET
L To program other entries, repeat steps 5
and 6 (up to 20 entries).
7. Press {SET} to start transmission to the
programmed entries.
To cancel the broadcast setting
1. Press {STOP} while the unit displays the
following.
BROADCASTING
L The display will show the following.
SEND CANCELED?
YES:SET/NO:STOP
2. Press {SET}.
{BROADCAST}
{<}{>}{+}{-}
{STOP}
{SET}
FACE DOWN