Filter
Top Products
59
Fax/Copy
Multiple stations
This feature is useful when you send the same documents to selected parties whose telephone numbers are
stored in a One-Touch Dial key and the JOG DIAL directory. You must program the desired parties into one of
the BROADCAST key (One-Touch Dial key 1, 2 or 3).
Important:
●
Before programming, make sure that the desired telephone numbers have been stored into a One-Touch
Dial key or the JOG DIAL directory.
●
The BROADCAST key can be used as One-Touch Dial key 1, 2 or 3 or as the broadcast key.
1
Press .
Display:
2
Press .
3
Press or to select “BROADCAST 1 (2 or 3)”.
Example:
4
Press .
5
Enter the station.
a: Using a One-Touch Dial key:
For stations 1–3 which are not used as the
key, press the preset
One-Touch Dial key.
For stations 4–6, press , then press
the preset One-Touch Dial key.
Example:
b: Using the JOG DIAL directory:
Rotate until the desired name is
displayed.
Example:
Press .
Example:
●
To enter other stations, repeat this step (up to
20 stations).
John [002]
START/SET/COPY
John [001]
JOG DIAL
DIR=Luke [001]
LOWER
BROADCAST
DIR= [000]
START/SET/COPY
BROADCAST 1
▼▲
DIAL MODE
▼▲
BROADCAST
OR USE JOG-DIAL
PRESS STATION
DIRECTORY PROGRAM
1
2 3
4
5 6
7
8 9
0
START/SET/COPY
/
One-Touch Dial keys
DIRECTORY PROGRAM
LOWER
STOP
JOG DIAL
BROADCAST
/
Programming the BROADCAST key with telephone numbers
6
Press after entering
all of the desired stations.
●
To program another BROADCAST key,
repeat steps 2 to 6.
7
Press to exit
the program.
DIRECTORY PROGRAM
OR USE JOG-DIAL
PRESS STATION
REGISTERED
START/SET/COPY
Note:
●
If you make a mistake while programming,
press , then make the correction.
●
Confirm the stored numbers by printing a
broadcast list (p. 116).
STOP
Sending Faxes