Filter
Top Products
36
JOG DIAL
To keep the telephone number secret
Press (One-Touch Dial key 3) after
entering the telephone number in step 5.
●
A secret number can not be viewed after this is set.
●
The telephone number will not appear on the
telephone number list.
●
Pressing does not count as a digit.
SECRET
SECRET
Storing names and telephone numbers
in the JOG DIAL directory
For rapid access to frequently dialed numbers, the unit also provides a JOG DIAL directory (100 stations) in
addition to One-Touch Dial keys. For your convenience, the following 2 stations have been preprogrammed in
the JOG DIAL directory.
HELP-FAX (1-800-435-7329): If you cannot correct a problem after trying the help function (p. 17), call using
this station (p. 38).
IQ-FAX-CS (IQ-FAX Customer Service Center) (1-888-332-9728): If you have a problem with IQ-FAX, call
using this station (p. 38).
If you do not need the above stations, you can edit or erase them (p. 37).
1
Press .
Display:
2
Rotate until the following is displayed.
3
Enter the name, up to 10 characters, by following
the instructions on page 27.
Example:
4
Press .
5
Enter the telephone number up to 30 digits.
Example:
6
Press .
●
To program other items, repeat steps 3 to 6.
7
Press to exit the
program.
DIRECTORY PROGRAM
NAME=
REGISTERED
START/SET/COPY
NO.=5552233
NO.=
START/SET/COPY
NAME=Alice
NAME=
JOG DIAL
OR USE JOG-DIAL
PRESS STATION
DIRECTORY PROGRAM
1
2 3
4
5 6
7
8 9
0
JOG DIAL
START/SET/COPY
STOP
SECRET
DIRECTORY PROGRAM
/
Note:
●
To confirm the stored names and telephone
numbers, print a telephone number list
(p. 116).
●
You can store items during a telephone
conversation.
●
When the following message is displayed in
step 6, you can only store 5 items.
Display:
●
If the unit shows “JOG-DIAL FULL” in step 1,
there is no space to store new stations. Edit
or erase unnecessary stations (p. 37).
●
By rotating , stored items can be
displayed.
JOG DIAL
SPACE= 5 DIRS.
To correct a mistake
●
Press or to move the cursor to the
incorrect character, then make the correction.
To delete a character
●
Move the cursor to the character you want to
delete and press .
STOP