Filter
Top Products
97
Remote Operation
Answering
Device
Changing to the TEL mode
You can change the setting of the receive mode from TAD/FAX to TEL from a remote location.
1. Call your unit.
2. Enter your remote operation ID.
3. Press .
8 0
Message transfer is set.
Transfer phone number is 123456789.
Press to turn ON the message transfer.
8 1
Voice guide example:
Turning the message transfer on or off
You must pre-program a transfer telephone number (p. 100) before using this feature.
Message transfer is off.
Press to turn OFF the message transfer.
8 2
— If a transfer telephone number is not programmed,
you cannot turn this feature ON. The voice guide will
prompt you.
Transfer phone number is not set.
Pager call is set.
Pager number is 098765432.
Press to turn ON the pager call.
8 3
Voice guide example:
Turning the pager call on or off
You must pre-program a pager number (p. 80) before using this feature.
Pager call is off.
Press to turn OFF the pager call.
8 4
— If a pager number is not programmed, you cannot
turn this feature ON. The voice guide will prompt you.
Pager number is not set.
Skipping the greeting message
Press during the greeting message playback.
— The unit will skip the rest of the greeting message.
0