1.6 Output tray
Insert the output tray extender (A) until it clicks into
place, and then press the centre part (B) of the extender
to open it.
B
A
Note:
R Do not place the unit in an area where the output tray
may be easily bumped into.
R The output tray can hold up to approximately 100
sheets of printed paper (the number of sheets may
vary depending on the usage environment). Remove
the printed paper before the output tray becomes full.
If the top part of the extender is detached
1. With the top part of the extender in the open position,
insert the tab (A) into the left hole (B) of the
extender.
B
A
2. Slide the other tab (C) into the right hole (D) of the
extender from below until it clicks into place.
D
C
13
1. Introduction and Installation