9.3 Cancelling the operations
You can cancel the current operation from the unit. You
can also select the desired operation to cancel.
1 MStopN
R “USER STOPPED” is displayed.
R If “USER STOPPED” is not displayed, go to step
2.
2 To cancel printing:
Press MStopN repeatedly to display “STOP
PRINTING?”.
To cancel scanning (KX-MB2025/KX-MB2030
only):
Press MStopN repeatedly to display “STOP
SCANNING?”.
To cancel copying:
Press MStopN repeatedly to display “STOP
COPYING?”.
To cancel sending or receiving faxes
(KX-MB2025/KX-MB2030 only):
Press MStopN repeatedly to display “STOP FAX?”.
To cancel broadcast transmission (KX-MB2025/
KX-MB2030 only):
Press MStopN repeatedly to display “BROAD
CANCELLED?”.
To cancel fax redialling (KX-MB2025/KX-MB2030
only):
Press MStopN repeatedly to display “SEND
CANCELLED?”.
3 MSetN
9.4 Handset unit (KX-MB2025/
KX-MB2030 only)
Important:
R Before installing or removing the handset unit, be
sure to turn the power switch OFF.
1 Connect the handset cord (A).
A
2 Connect the handset connector (B).
R Remove the seal from the handset unit
connection jack if attached.
B
77
9. Useful Information