Panasonic KX-MB2025FX All in One Printer User Manual


 
8.6 Scan features
Feature/Code Selection
Setting the scan mode for
Push Scan
MBNM4NM9NM3N
M1N VIEWER (default): The scanned image will be displayed in the
[Multi-Function Viewer] window.
M2N FILE: The scanned image will be saved as a file.
M3N EMAIL: The scanned image will be saved for email attachment.
M4N OCR: The scanned image will be displayed in the OCR window.
M5N EMAIL ADDRESS: The scanned image will be sent as an attachment
without using email software.
M6N FTP SERVER: The scanned image will be sent to the pre-programmed
folder on the FTP server.
M7N SMB FOLDER: The scanned image will be sent to the pre-programmed
SMB folder.
Note:
R Following selections will be displayed only when the server setting is
programmed through the web browser interface in advance (KX-MB2000/
KX-MB2010/KX-MB2030 only).
EMAIL ADDRESS will be displayed when the email server setting is
programmed (page 69).
FTP SERVER will be displayed when the FTP server setting is
programmed (page 70).
SMB FOLDER will be displayed when the SMB folder setting is
programmed (page 70).
Holding the previous
scanning parameter for Push
Scan
MBNM4NM9NM4N
M0N DISABLED (default): Deactivates this feature.
M1N ENABLED: The unit will hold the previous scan settings for each mode of
push scan.
Setting the information for
scan to email address
(KX-MB2000/KX-MB2010/
KX-MB2030, LAN connection
only)
R This feature can be
programmed only through
the web browser interface.
When you send scanned files as email attachments directly from this unit, you
need to program the email server and SMTP server settings beforehand.
Consult your service provider or network administrator for details.
1. Start Multi-Function Station.
2. [Utilities] A [Configuration Web Page] A [Device Configuration]
3. Type “root” as the user name, then enter the password (feature #155 on
page 59). A [OK]
4. Select the [SCAN FEATURE] tab.
5. Click [Edit] next to [EMAIL SERVER].
6. Enter the email server and SMTP server information. A [Submit]
7. Close the web browser.
69
8. Programmable Features