Panasonic KX-MB2025FX All in One Printer User Manual


 
Problem Cause & Solution
The [Windows Security Alert]
dialogue box appears and
asks if I want to block
[PCCMFLPD] and I cannot
operate the following
functions after installing the
Microsoft Windows XP
Service Pack 2 or later.
PC printing
Scanning
Remote Control
PC FAX (KX-MB2030 only)
Device Monitor
R Click [Keep Blocking] and run the Windows Firewall Setting Tool to allow
the data transmission for Multi-Function Station (page 90).
10.3.7 Using an answering machine (KX-MB2025/KX-MB2030 only)
Problem Cause & Solution
I cannot receive documents
automatically.
R Your greeting message on the answering machine is too long. Shorten the
message. Record a message less than 10 seconds long.
R The answering machine rings too many times. Set to 1 or 2 rings.
I cannot receive voice
messages.
R Check if the answering machine is turned ON and connected to the unit
properly (page 51).
R Set the number of rings on the answering machine to 1 or 2.
I pressed the remote access
code to access the answering
machine remotely, but the line
was disconnected.
R The code may include “#” which is used for certain features provided by
telephone companies. Change the code on the answering machine to
another number which does not include “#”.
Callers complain that they
cannot send a document.
R There is no room left in the memory of your answering machine to record
voice messages. See the operating instructions of the answering machine
and erase unnecessary messages.
R You set the answering machine to only give a greeting message.
10.3.8 If a power failure occurs
R The unit will not function.
R If any documents are stored in the memory (i.e. during copying, PC printing), they will be lost.
KX-MB2025/KX-MB2030 only:
R The unit is not designed for making emergency telephone calls when the power fails. Alternative arrangements
should be made for access to emergency services.
R Fax transmission and reception will be interrupted.
R Documents during fax transmission or fax reception will be lost.
R When power is restored, a power down report will be printed out stating which fax items in the memory have been
erased.
10.3.9 Firewall setting tool for Microsoft Windows XP Service Pack 2 or later/Windows Vista
users (KX-MB2000/KX-MB2010/KX-MB2030, LAN connection only)
After installing Microsoft Windows XP Service Pack 2 or later/Windows Vista, you will not be able to use the following
functions because the Windows Firewall feature will be activated and block the connection.
Device Monitor
LPD Manager (Network communication tool)
The Windows Firewall Setting Tool enables you to change the Windows Firewall security settings and to use the
above functions properly.
90
10. Help