Filter
Top Products
127
The procedure described below lets you determine on-screen display (OSD) items, such as camera title, clock and status, on
and off on the active monitor screen.
Before controlling each item, monitor selection is necessary. (Refer to p. 125 Monitor Selection.)
1. Press the SHIFT button, and then press the numeric buttons corresponding to the function code.
(Refer to the table.)
2. Press the FUNCTION button. The function will be executed.
Notes:
• Alarm History Table doesn't have a function code. When displaying the table, press the ALM RECALL button instead of
Step 1 and 2 above. The ALARM HISTORY table will appear on the active monitor.
• You cannot control OSD display position.
MONITOR DISPLAY CONTROL
Function Code
Controller Status Note
Displaying the clock 104 Pressing again will hide the display.
Displaying the camera title 105 Pressing again will hide the display.
Displaying the event 106 Pressing again will hide the display.
Displaying the monitor status
107 Pressing again will hide the display.
Displaying all the items 19 Pressing again will hide the display.
Displaying System Status 102 Pressing again will return to the normal display.
Displaying Video Loss History
Displaying the previous page of
Video Loss History
103
108
109
Pressing again will return to the normal display.
Displaying the next page of
Video Loss History